Find motors

Please note that from 1HP to 200HP foot and foot/flange mounted 2, 4 and 6-pole motors need to fulfill IE3 and flange mounted motors IE2 requirements. In addition all 8-pole motors up to 200HP need to fulfill IE2 requirements.
Please note that from 1HP to 200HP foot and foot/flange mounted 2, 4 and 6-pole motors need to fulfill IE3 and flange mounted motors IE2 requirements. In addition all 8-pole motors and/or all 2,4, 6 and 8-pole motors from 201 to 500Hp need to fulfill IE2 requirements.
Please note that starting 1.1.2015 motors with output power 7,5kW up to 375kW in 2, 4 and 6-pole with IE2 efficiency level can only be used with a variable speed drive within the European Community.
Content of TR - MEPS is equal to EU - MEPS
AU MEPS is equivalent to IE2 or for some output powers slightly higher. AU HE MEPS is equivalent to IE3 or for some output powers slightly higher.
Minimum efficiency requirement according to the country of final use. Search will show all motors which may be used on the market following MEPS regulation in question: both motors under the MEPS regulation and motors which are not relevant to the regulation. Motors not relevant to the regulation are marked with yellow triangle.
[Required] MEPS
Efficiency class
Frame mat.
Motor range
Product class
Voltage
Frequency
Speed
Output

Find by product code or motor type

e.g. M3BP280SMA / 3GBP282210

Input the product code to quickly find the motor you are looking for.

Output
Volt./Hz
 
Eff. class
Type
Speed
Motor range
Data
Type of protection

Cost of ownership

Documentation

Summary and export